Gas vs. Electric Ovens
What are the pros and cons for using gas or electric to heat a typical automotive supplier curing oven?
#curing #asktheexpert #automotive
How to Adjust a Burn-Off Oven To Remove Coatings
Q. We are having issues with our burn-off oven. It doesn’t seem to be adjusting to the amount of coating on the hooks and fixtures. What can I do to fix this?
#curing #asktheexpert
Considerations for Buying A Burn-Off Oven
A time-tested way to keep hooks clean is with a burn-off oven, and Steelman Industries’ Carlton Mann explains considerations for buying one.
#asktheexpert
Choosing Between a Conveyor vs. Batch Processing
Although many companies are converting to conveyor or continuous processing, Bob Hauck from Spray Systems says there are advantages and disadvantages to each type of processing.
#asktheexpert
Finding Correlations to Salt Spray and UV Protection Hours
Bob Hohn with Assured Testing Services says it is often difficult to equate test duration to actual years of field service.
#asktheexpert
How to Know When to Change Spray Booth Filters
When it comes to determining when to change your spray booth filters, Trey Peavy from Col-Met Engineered Finishing Solutions says to first differentiate between intake filters and exhaust filters.
#asktheexpert
Designing Batch Ovens for Powder Coating Operations
Curing ovens are an important part of any finishing operation, and Col-Met’s John Owed says understanding key elements will assist in selecting the right oven for your application.
#asktheexpert
Steps for Automating Your Paint Booth with Robots
Graco’s Bill Heuer explains the important considerations to think about before investing in a system with robots.
#asktheexpert
Designing Spray Booths by Applying the Right Airflow Design
Spray booth solutions are varied, Spray Systems’ Bob Hauck says, so use key performance objectives to arrive at the best airflow option for you.
#asktheexpert
Why Temperatures Change Between Liquid Circulation System and Point of Application
Mike Bonner with Saint Clair Systems says a specialized control system is required to eliminate temperature changes between a liquid circulation system and point of application.
#asktheexpert